OUR PRODUCTS...
MODULAR LIQUID-TIGHT SYSTEMS...
"Shaft Kit" for each type of shaft
There is a "Shaft Kit" for each kind of shaft. There is a muzzle form for each shaft diameter and for each kinf of shaft: standard shaft with stc’s tail and ring, X Shaft Free and standard shaft. This versatility makes "X-Power" system unique and adaptable without any effort to the various needs of the underwater fisherman during the entire fishing trip...
X-POWER II AND III SHAFT KIT - FREE, STANDARD AND MONGOOSE...
"Mongoose-X" project ... the 3rd way
It is a complete kit dedicated to "X-Power" 2.0 and 3.0 consisting of two elements in acetal resin. In the front there is space for the compartment to accommodate the titanium shutter (3.0 gr.) and the seal seal (OR) while the lower part acts as a "floor" for the seal housed in the upper module. The terminal may be disassembled and inspected at any time to verify the integrity of the sealing element...
"MONGOOSE-X" ... the 3rd way...
"X-Runner" System (self-lubricated pistons for pneumatic sperarguns)
The "X-Runner" system consists of a piston for spearguns with an internal barrel of 13 mm, 12 mm and 11 mm, and a special Shock absorber: completely redesigned that combines high thermoplastic materials resistance with high soundproofing power...
SELF-LUBRICATED PISTONS WITH VERY LOW FRICTION COEFFICIENT...
"X-Release" (Release mechanism)
Low resistance release mechanism. Hardness, robustness, sensitivity and safety
"X-Release" mechanism is characterized by a low profile. It has a groove made in the central part to house one of the "stems" of the torsion spring. The torsion spring considerably relieves the tension on the trigger during the firing phase, and allows a more precise shot...
HIGH SENSITIVE RELEASE MECHANISMS FOR TRIGGERS...
"X-Pin" System
Kit for 1.5 mm release pin. Complete kit with Aisi 316 steel parts (1.5 mm bushing and pin) and sealing elements (OR).
Replacing the original 3.0 mm pin with the new 1.5 mm "X-Pin" will allow you to further increase the sensitivity of your speargun shotgun trigger...
"X-PIN" KIT FOR TRIGGER SENSITIZATION...
"X-Shot" 2.0 line-slider
X Shot is the plastic line-slider made with a material called "self-lubricating" because it increases its smoothness. Its small size allows to minimize friction with water: the result is a greater speed of the rod. Its design protect the line...
HIGH HYDRODYNAMIC LINE SLIDERS...
Tahitian "X-Shaft Free"
Tahitian shaft for oleopneumatic speargun with "rear flap" splice, integrated tail and no centering washer.
The “X-Shaft Free” is a traditional Tahitian shaft, single or double wing, but with two peculiar characteristics. A through hole with an internal diameter of 2.00 mm made near the wing (about 3 cm.) for the "splicing" of the line, and an end part, carefully machined to operate in direct contact with the piston...
TAHITIAN SHAFTS "X-SHAFT FREE" ... SPEED IN SILENCE...
"X-Lube" (High performance lubrication system)
"X-Lube" is an innovative lubricant capable of extending the duration of the lubrication of your speargun by at least four times compared to that obtained with traditional lubricants. Thanks to the PTFE micronization, the quantity of product needed to cover a surface is approximately 8/10 times less than a traditional lubricant. Its formulation allows it to "become related" to the aluminum of the barrel, reducing friction exponentially and offering unprecedented piston ejection speed...
"PTFE" BASED LUBRICATION FOR MAXIMUM PERFORMANCE...